Studio-technologies 42 User Manual Page 1

Copyright © 2004 by Studio Technologies, Inc., all rights reservedwww.studio-tech.com50125-0704, Issue 1User GuideIssue 1, July 2004This User Guide is

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 11connected device(s), the minimum voltagerequired by the connected device(s), an

Issue 1, July 2004 Model 42 User GuidePage 12 Studio Technologies, Inc.power present LED should be lit. This LEDis powered by the internal 36 volt DCp

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 13action will depend on the specific over-load condition that is present. In gene

Issue 1, July 2004 Model 42 User GuidePage 14 Studio Technologies, Inc.the Model 200 (24 volts) allows a 6 voltmaximum drop over the interconnectingca

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 15user devices. This allows more devicesto be supported over longer cable runs.Ho

Issue 1, July 2004 Model 42 User GuidePage 16 Studio Technologies, Inc.It’s interesting to note the reason whytypical IFB circuit audio quality is les

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 17Interfacing Riedel Artist™ Matrix Intercom Systems with the Model 42 InterfaceI

Issue 1, July 2004 Model 42 User GuidePage 18 Studio Technologies, Inc.This page intentionally left blank.

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 3Table of ContentsIntroduction ...

Issue 1, July 2004 Model 42 User GuidePage 4 Studio Technologies, Inc.This page intentionally left blank.

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 5IntroductionThe Model 42 is designed to createbroadcast-standard IFB circuits fr

Issue 1, July 2004 Model 42 User GuidePage 6 Studio Technologies, Inc.wet IFB circuit is the type implementedby the Model 42. As such, in this usergui

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 7circuit topology, a unique IFB circuit wasdeveloped by Studio Technologies toach

Issue 1, July 2004 Model 42 User GuidePage 8 Studio Technologies, Inc.dealer or distributor should provide anAC mains cord for other destinations.Loca

Model 42 User Guide Issue 1, July 2004Studio Technologies, Inc. Page 9connect signal high to the + pins, andshield to both the – and the shield pins.I

Issue 1, July 2004 Model 42 User GuidePage 10 Studio Technologies, Inc.With these systems maximum Model 42performance would be provided by reduc-ing t